Bottleneck Bangs: Narrow at the Part, Wide at the Temple

Bottleneck bangs sit short and narrow at the brow, then widen past the cheekbone, so the fringe frames your eyes instead of covering them. They’re easiest on fine to medium straight or wavy hair, style with a quick pass of a round brush most mornings, and need a trim every five to eight weeks to keep that shape.

1. Bottleneck Bangs With Long Layers

Bottleneck bangs with long layers are short at the center, at the brow, and widen past the cheekbone into the first layer, so the shape reads like the neck of a bottle. I cut the center on dry hair, drop the sides to the cheekbone, point cut the transition, then run layers from the collarbone down. Medium density and 1B to 2B texture suit it on oval and round faces. Blow-dry out with a round brush. Trim every six weeks.

2. Wispy Bottleneck Bangs

Wispy bottleneck bangs are thinned to half the density of a standard set, so the narrow center and the wide sides both read light. I cut from a shallow section on dry hair, cut the center at the brow, drop the sides to the cheekbone, and point cut deep. Fine density and 1A to 2A texture suit them on any face shape, at any age. Air-dry and push the sides apart with fingers. Trim every five weeks.

3. Bottleneck Bangs for Round Faces

On a round face, bottleneck bangs work when the center sits at the brow and the sides drop well below the cheekbone, so the flare pulls the eye down past the widest point. I cut on dry hair, angle the sides steeply, and point cut them into layers below the jaw. Medium density and 1A to 2B texture suit them, on a lob or longer. Blow-dry out with a round brush and lift the crown. Trim every six weeks.

4. Bottleneck Bangs on a Lob

A lob with bottleneck bangs stops at the collarbone, and the fringe narrows at the brow and widens to the cheekbone. I cut the perimeter on dry hair, point cut the ends, then cut the center of the bangs at the brow and drop the sides. Fine to thick density and 1A to 2B texture suit it on round and square faces, at any age. Blow-dry the bangs out and the ends under. Trim every six weeks.

5. Bottleneck Bangs for Fine Hair

Fine hair carries bottleneck bangs when the section stays shallow, under an inch, and the center is kept narrow, so the rest of the hair keeps its weight. I cut the center at the brow on dry hair, drop the sides to the cheekbone, and point cut lightly. Fine density and 1A to 2A texture suit them on oval and round faces. Apply a root mousse and blow-dry out with a round brush. Trim every five weeks.

6. Curly Bottleneck Bangs

Curly bottleneck bangs are cut dry, curl by curl, with the center left at the bridge of the nose and the sides past the cheekbone. I shape the rest on dry hair with long layers so the curl stacks. Medium to thick density and 3A to 3C texture suit them on oval and heart faces. Apply a curl cream to soaking wet hair, split the center, and diffuse on low. Trim every ten weeks.

7. Bottleneck Bangs With a Shag

A shag with bottleneck bangs razors the crown short and lets the wide sides of the fringe fall into the first layer at the cheekbone. I razor the crown on dry hair, cut the center of the bangs at the brow, drop the sides, and point cut the transition into the layers. Medium to thick density and 1C to 2C texture suit it on oval and square faces. Rough-dry with a sea salt spray. Trim every eight weeks.

8. Bottleneck Bangs on Thick Hair

Thick hair takes bottleneck bangs when the section is thinned from the inside, or the narrow center sits as a block and the sides sit as wedges. I remove interior weight with thinning shears on dry hair, cut the center at the brow, drop the sides to the cheekbone, and point cut. Thick density and 1A to 2B texture suit them on any face shape. Blow-dry out with a round brush and a smoothing cream. Trim every six weeks.

9. Short Bottleneck Bangs

Short bottleneck bangs put the center half an inch above the brow and the sides only to the eye, which keeps the flare tight to the face. I cut from a shallow section on dry hair and point cut the sides so the step reads soft. Medium density and 1A to 1C texture suit them on oval and oblong faces. Blow-dry out with a small round brush and set with a light hold spray. Trim every four weeks.

10. Bottleneck Bangs With a Middle Part

A middle part with bottleneck bangs is the usual pairing, because the narrow center already splits where the part falls. I section from the recession points, cut the center at the brow on dry hair, drop the sides to the cheekbone, and point cut the transition. Medium density and 1A to 2B texture suit it on oval and round faces, on a lob or longer. Blow-dry out with a round brush and the length straight. Trim every six weeks.

11. Bottleneck Bangs for Women Over 40

Over 40, bottleneck bangs sit at the brow or just below at the center, with the sides point cut soft into the face frame so the fringe looks like part of the cut. I cut from a shallow section on dry hair and blend the sides into layers at the jaw. Fine to medium density and 1A to 2A texture suit them on any face shape. Blow-dry out with a round brush and a volumizing mousse. Trim every six weeks.

12. Bottleneck Bangs on Wavy Hair

Wavy hair takes bottleneck bangs cut half an inch longer than the target at the center and an inch longer at the sides, because the wave pulls both up as they dry. I cut on dry hair and check once the wave sets. Medium density and 1C to 2B texture suit them on oval and heart faces. Scrunch a light cream through damp hair, split the center with fingers, and air-dry. Trim every six weeks.

13. Bottleneck Bangs With Face-Framing Layers

Bottleneck bangs with face-framing layers run one line from the brow to the collarbone, with the narrow center as the first step and the wide sides as the second. I cut the center on dry hair, drop the sides to the cheekbone, then connect to the face frame in two-inch steps. Medium to thick density and 1A to 2B texture suit it on round and square faces. Blow-dry out with a round brush. Trim every eight weeks.

14. Bottleneck Bangs for Square Faces

On a square face, bottleneck bangs cut with the center at the brow and the sides below the cheekbone soften the corners of the forehead and the jaw. I cut on dry hair, point cut the sides, and start layers below the jaw so no line stops at the jawline. Medium density and 1A to 2B texture suit them, on a lob or longer. Blow-dry out with a round brush and the ends under. Trim every six weeks.

15. Bottleneck Bangs With a Bob

A bob with bottleneck bangs puts the perimeter at the jaw and the wide sides of the fringe at the cheekbone. I cut the perimeter on dry hair, point cut the ends, then cut the center of the bangs at the brow and drop the sides. Fine to medium density and 1A to 2A texture suit it on oval and heart faces. Blow-dry under with a round brush and the bangs out. Trim every five weeks.

16. Bottleneck Bangs With Highlights

Highlights through bottleneck bangs are woven fine down the wide sides and kept light at the narrow center, two levels above the base. I cut the bangs on dry hair, then foil the sides and the face frame. Fine to medium density and 1A to 2B texture suit it. Blow-dry out with a round brush and tone every six weeks. Refresh the foils every ten.

17. Long Bottleneck Bangs

Long bottleneck bangs put the center at the bridge of the nose and the sides at the jaw, which makes them the easiest version to grow out. I cut the center on dry hair, drop the sides on a steep angle, and point cut deep so the center separates. Medium density and 1A to 2B texture suit them on round and square faces. Blow-dry out with a large round brush or tuck behind the ear. Trim every eight weeks.

18. Bottleneck Bangs on Straight Hair

Straight hair shows every line of bottleneck bangs, so the step from the center to the sides has to be point cut until it disappears. I cut the center at the brow on dry hair, drop the sides to the cheekbone, and point cut the transition in half-inch sections. Fine to medium density and 1A to 1B texture suit them on oval and heart faces. Blow-dry out with a round brush and finish with serum. Trim every five weeks.

19. Bottleneck Bangs for Heart Faces

A heart face takes bottleneck bangs when the center sits lower, at the bridge of the nose, so the forehead is covered and the wide sides add width at the jaw. I cut from a deeper section on dry hair, drop the sides to the jaw, and start layers at the chin. Fine to medium density and 1A to 2A texture suit them. Blow-dry out with a round brush and the layers out at the jaw. Trim every six weeks.

20. Bottleneck Bangs With a Wolf Cut

A wolf cut with bottleneck bangs uses heavy razored crown layers and a fringe that narrows at the brow and falls into cheekbone pieces. I razor the crown on dry hair, leave the length, cut the center of the bangs, drop the sides, and point cut. Medium to thick density and 1C to 2C texture suit it on oval and square faces, on women in their 20s. Rough-dry with a texture spray and scrunch. Trim every eight weeks.

21. Bottleneck Bangs for Women Over 50

Over 50, bottleneck bangs are cut from a shallow section with the center at the brow and the sides point cut soft to the cheekbone, on a lob or shoulder-length layers. I cut on dry hair and blend the sides into the face frame. Fine to medium density and 1A to 2A texture suit them on any face shape. Blow-dry out with a round brush and a root mousse, and gloss every six weeks. Trim every six weeks.

22. Copper Bottleneck Bangs

Copper through bottleneck bangs puts the brightest color at the narrow center of the forehead and down the wide sides. I cut the bangs on dry hair, then apply a level seven copper at the root and a demi through the ends. Medium density and warm skin tones suit it, on a lob or longer. Blow-dry out with a round brush and wash in cool water. Refresh the tone every five weeks and trim every six.

23. Bottleneck Bangs That Air-Dry

Bottleneck bangs that air-dry are cut with every end point cut, so the center splits and the sides flare without a brush. I cut the center at the brow on dry hair, drop the sides to the cheekbone, and point cut deep. Fine to medium density and 1C to 2B texture suit them on any face shape. Apply a light cream to damp hair, split the center with fingers, and leave it. Trim every six weeks.

24. Bottleneck Bangs on Shoulder-Length Hair

Shoulder-length hair with bottleneck bangs lets the wide sides run into layers that start at the chin. I cut the perimeter at the shoulder on dry hair, point cut the ends, then cut the center of the bangs at the brow and drop the sides to the cheekbone. Medium density and 1A to 2B texture suit it on round and square faces. Blow-dry out with a round brush. Trim every six weeks.

25. Bottleneck Bangs With Balayage

Balayage with bottleneck bangs is painted from the cheekbone down and kept off the narrow center, so the fringe stays the depth of the root and frames the lighter ends. I cut the bangs on dry hair first, then hand paint the length to a level nine. Fine to thick density and 1A to 2B texture suit it. Blow-dry out with a round brush and tone every eight weeks. Refresh the balayage every twelve weeks.

26. Blonde Bottleneck Bangs

Blonde through bottleneck bangs is lifted a level lighter than the rest, so the narrow center reads as the brightest piece on the face. I cut the bangs on dry hair, then foil the fringe to a level nine and tone beige. Fine to medium density and cool or neutral skin tones suit it. Blow-dry out with a round brush and use a bond builder weekly. Retouch every six weeks and trim the bangs at the same visit.

27. Bottleneck Bangs on Dark Hair

Dark hair shows bottleneck bangs as one narrow line at the brow and two wide lines at the cheekbone, so all three have to be clean. I cut the center on dry hair, drop the sides, point cut the transition, then apply a level four demi from root to end. Medium to thick density and cool or neutral skin tones suit it. Blow-dry out with a round brush and finish with serum. Refresh the tone every eight weeks.

28. Bottleneck Bangs With Glasses

Bottleneck bangs with glasses need the narrow center to clear the bridge of the frames and the wide sides to clear the arms. I cut the center at the brow with the glasses on, on dry hair, and drop the sides past the arms to the cheekbone. Fine to medium density and 1A to 2A texture suit them on any face shape. Blow-dry out with a small round brush and set with a light spray. Trim every five weeks.

29. Bottleneck Bangs With a Butterfly Cut

A butterfly cut with bottleneck bangs pairs short crown layers with a fringe that narrows at the brow and flares into the first layer. I cut the crown layers short on dry hair, leave the length, then cut the center of the bangs at the brow and drop the sides to the cheekbone. Medium to thick density and 1B to 2B texture suit it on oval and round faces. Blow-dry out with a large round brush. Trim every eight weeks.

30. Bottleneck Bangs for Women Over 60

Over 60, bottleneck bangs keep the center at the brow, the sides soft to the cheekbone, and the section shallow, on a chin-length bob or lob. I cut on dry hair and point cut the ends so they stay full. Fine density and 1A to 2A texture suit them on any face shape. Blow-dry out with a small round brush and a root mousse, and finish with a light hairspray. Trim every six weeks and gloss every eight.

31. Bottleneck Bangs With a Side Part

A side part with bottleneck bangs moves the narrow center an inch off the part, so one side of the flare runs longer than the other. I cut the short side at the brow on dry hair, the long side at the cheekbone, and point cut both into the face frame. Medium density and 1A to 2B texture suit it on round and square faces. Blow-dry out with a round brush toward the long side. Trim every six weeks.

32. Grown Out Bottleneck Bangs

Grown out bottleneck bangs are at their best once the center reaches the bridge of the nose, because the shape turns into curtain bangs on its own. I cut the center on dry hair, drop the sides to the jaw, and point cut them into the first layer. Fine to thick density and 1A to 2B texture suit them, at any age. Blow-dry out with a round brush or tuck behind the ears. Trim every eight weeks.

33. Low Upkeep Bottleneck Bangs

For clients who want three months between trims, I cut bottleneck bangs with the center at the bridge of the nose and the sides blended into the layers, so they grow into the face frame instead of into the eyes. I cut on dry hair and point cut the ends. Fine to medium density and 1A to 2B texture suit them on any face shape, on shoulder-length hair or longer. Air-dry with a light cream. Trim every twelve weeks.

Worth a look next: birkin bangs and bangs for oval face.

Bottleneck bangs work because they are narrow where the hair parts and open wider toward the temple, so they frame the eye without covering it. I keep the center at a half inch and shear the sides longer so they disappear into layers.

Scroll to Top