Textured Shag Haircut: Soft Layers, Curtain Bangs

A medium textured shag haircut tends to look better on second-day hair, once the sea salt spray has settled and the crown layers have pulled apart a little. On medium to thick hair it rough-dries fast with no round brush, and by afternoon a bit of humidity frizz just reads as more texture in the choppy layers.

1. Medium Textured Shag With Curtain Bangs

A textured shag haircut at medium length, with the perimeter at the collarbone and crown layers at four inches, is the version most clients ask for first. I razor the crown, point cut the perimeter, and slide cut curtain bangs to the cheekbone. Medium to thick density suits it on oval and long faces. Rough-dry with sea salt spray and scrunch. Trim every seven weeks.

2. Shoulder-Length Textured Shag

At the shoulder, a textured shag has enough length to swing and enough layering to keep it from sitting flat. I cut layers from the chin down with a razor and point cut the ends. Medium density suits it on oval and heart faces, on women in their 20s through 40s. Scrunch in a texture cream and air-dry, or blow-dry the crown with a round brush. Trim every eight weeks.

3. Jaw-Length Textured Shag

A jaw-length textured shag reads as a choppy bob with a shorter crown, and the deep point cutting through every layer gives it the texture. I cut the crown to three inches and the perimeter at the jaw. Medium density suits it on oval and long faces. Work a matte paste through dry hair and push the layers apart. Trim every six weeks.

4. Long Textured Shag

Past the collarbone, a textured shag keeps the shortest crown layers at five inches so the shape still reads as a shag and not a layered cut. I razor the crown and leave the perimeter blunt-ish with light point cutting. Medium to thick density suits it on oval and square faces. Rough-dry with texture spray. Trim every eight to ten weeks.

5. Textured Shag With Wispy Bangs

Wispy bangs take a shallow section from the crown, so the shag keeps most of its top layers. I point cut the bangs at the brow so skin shows through, then razor the layers behind. Fine to medium density suits it on oval and heart faces. Blow-dry the bangs flat and scrunch the rest with a texture spray. Trim the bangs every four weeks and the cut every seven.

6. Textured Shag With Bottleneck Bangs

Bottleneck bangs start narrow at the part and widen to the cheekbone, blending into the layers of a textured shag haircut at medium length. I cut the center at the brow, lengthen each side, and razor the crown behind. Medium density suits it on oval and heart faces, on women in their 20s through 40s. Blow-dry the bangs with a medium round brush. Trim every six weeks.

7. Textured Shag With Blunt Bangs

Blunt bangs cut straight across at the brow give a textured shag a graphic front that plays against the choppy layers. I cut the bangs dry from a shallow section and thin the underside. Medium density suits it on oval and long faces. Blow-dry the bangs flat with a paddle brush and rough-dry the rest. Trim the bangs every four weeks and the shag every seven.

8. Textured Shag With Side-Swept Bangs

Side-swept bangs take a narrow diagonal section, so the shag keeps its weight in the layers. I cut them long at the cheekbone and point cut the ends, then razor the crown. Medium density suits it on round and square faces, on women over 30. Blow-dry the bangs across with a round brush and scrunch the rest. Trim every six weeks.

9. Razor-Cut Textured Shag

The razor gives a textured shag its soft, broken-up ends. I razor every layer on damp hair at a shallow angle, from the crown to the perimeter. Medium to thick density with a straight to wavy texture suits it on oval and heart faces. Avoid the razor on fine or frizzy hair. Rough-dry with a texture spray. Trim every six weeks.

10. Point-Cut Textured Shag

Point cutting gives the same texture as a razor with less risk of frizz, which is why I use it on fine or color-treated hair. I point cut deep into the crown layers and shallow into the perimeter. Fine to medium density suits it on oval and long faces, on women over 30. Blow-dry with a round brush and scrunch in a light paste. Trim every six weeks.

11. Textured Shag With Internal Layers

Internal layers are cut under the top section so the texture comes from inside while the outline stays intact. I cut two or three short layers underneath, then point cut the surface lightly. Thick density suits it on oval and heart faces, on women who want texture without a visibly choppy outline. Blow-dry with a round brush. Trim every eight weeks.

12. Textured Shag on Fine Hair

Fine hair carries a textured shag if the layers stay shallow and I point cut instead of razor, because a razor thins fine ends. Short crown layers give lift, and the perimeter stays at the shoulder. Fine density suits it on oval and heart faces. Blow-dry the crown upside down with a volumizing mousse, then scrunch in a dry texture spray. Trim every six weeks.

13. Textured Shag on Thick Hair

Thick hair is where a textured shag haircut at medium length does the most work, because the razored layers remove the bulk that makes thick hair heavy. I razor the crown and mid-lengths and take weight out under the occipital. Thick density suits it on oval and long faces. Rough-dry with sea salt spray and let the layers separate. Trim every seven weeks.

14. Textured Shag on Wavy Hair

Wavy hair at 2A to 2C fills out a textured shag without hot tools, and I cut it dry so I can see where each wave falls before razoring the crown. Medium to thick density suits it on oval and heart faces. Scrunch in a curl cream and diffuse on low, then break up the waves with fingers. Trim every seven weeks.

15. Curly Textured Shag

On 3A to 3B curls I cut the shag dry, curl by curl, so the crown springs up and the back stays longer. I skip the razor, which frizzes curls, and point cut instead. Medium to thick density suits it on oval and long faces. Apply a curl gel to soaking wet hair and diffuse, then separate a few crown curls. Shape every eight weeks.

16. Straight Textured Shag

Straight hair shows every layer in a textured shag, so I cut them cleanly with shears and razor only the last inch of the ends. The crown sits at four inches and the perimeter at the collarbone. Medium density suits it on oval and long faces. Blow-dry the crown with a round brush and flat iron the ends outward. Trim every six weeks.

17. Textured Shag With a Deep Side Part

A deep side part sends the heavy side of a textured shag across the brow and lifts the crown on the other. I cut the crown layers shorter on the light side so the part holds. Medium density suits it on round and oval faces. Blow-dry the roots against the part, then flip it back and scrunch in texture spray. Trim every six weeks.

18. Center-Part Textured Shag

A center part with curtain bangs is the 70s version of a textured shag, and it shows the shortest crown layers on both sides. I cut both sides to match and razor the layers evenly. Medium density suits it on oval and long faces, on women in their 20s and 30s. Rough-dry with sea salt spray and push the bangs apart. Trim every six weeks.

19. Textured Shag With Face-Framing Layers

Face-framing layers from the cheekbone to the chin connect the bangs to the body of a textured shag so the front does not step down in a hard line. I slide cut the front pieces dry and razor the rest. Medium to thick density suits it on oval and square faces. Blow-dry the front back with a round brush. Trim every six weeks.

20. Textured Shag Mullet

A shag mullet keeps the crown at three inches, the sides above the ear, and the back past the nape, with razored layers connecting all three. I cut the sides and crown first, then point cut the back. Medium density suits it on oval and square faces, on women in their 20s and 30s. Rough-dry with paste and push the back out. Trim every five weeks.

21. Textured Shag With a Nape Undercut

Clippering the nape under a textured shag takes out bulk and gives the back layers a clean stopping point. I clipper a two-inch band with a number two guard and razor the layers over it. Medium to thick density suits it on oval and heart faces, on women in their 20s and 30s. Rough-dry with paste. Re-clipper every four weeks.

22. Copper Textured Shag

Copper shows the layers of a textured shag because light catches each razored end. I color with a copper permanent at a level seven, then cut the shag dry. Medium to thick density suits it on oval and heart faces, on warm skin tones. Wash in cool water and use a copper-depositing conditioner weekly. Gloss every six weeks and trim every six.

23. Balayage Textured Shag

Balayage on a textured shag is painted onto the top of each layer, so the color sits where the razor opened the hair. I paint ribbons through the crown layers and ends and leave the root natural. Medium to thick density suits it on oval and long faces, on women over 30. Rough-dry with texture spray. Tone every eight weeks and repaint every four months.

24. Blonde Textured Shag

A level nine blonde on a textured shag shows every layer, so the cut has to be clean before lightening. I lift with a bond builder, tone, then razor the shag dry. Fine to medium density suits it on oval faces, on cool and neutral skin tones. Use a purple shampoo weekly. Tone every five weeks and retouch roots every eight.

25. Brunette Textured Shag With Money Piece

Two bright face-framing pieces at the front hairline light up the bangs of a brunette textured shag without changing the base. I foil the money piece to a level nine and tone it. Medium density suits it on oval and round faces, on women in their 20s and 30s. Blow-dry the bangs away from the face. Tone every six weeks and trim every six.

26. Textured Shag for Women Over 40

Over 40, I keep the textured shag softer: crown layers at four inches, point cutting instead of a razor, and a perimeter at the collarbone. The shape moves without looking undone. Medium density suits it on oval and heart faces. Blow-dry with a round brush and a light mousse, then scrunch the ends with a texture cream. Trim every seven weeks.

27. Textured Shag for Women Over 50

For clients over 50, short crown layers add lift where hair thins first, and the longer back keeps a textured shag from reading too short. I point cut the crown and leave the perimeter at the jaw or shoulder. Fine to medium density suits it on oval and round faces. Blow-dry the crown up with a root lift spray. Gloss every eight weeks and trim every six.

28. Textured Shag for a Round Face

On a round face, the height of the crown layers and long curtain bangs angled across the forehead lengthen the face. I keep the sides flat and the crown at three inches. Medium density suits it, on women over 30. Blow-dry the crown up and the bangs across with a round brush. Avoid width at the cheeks. Trim every six weeks.

29. Textured Shag for a Square Face

Square jaws soften with the broken-up edges of a textured shag, so I razor the perimeter and keep the length below the jaw. Curtain bangs at the cheekbone soften the forehead too. Medium to thick density suits it on square faces, on women in their 20s through 40s. Rough-dry with texture spray and bend any flat pieces with a flat iron. Trim every six weeks.

30. Textured Shag for a Heart Face

Heart faces need less at the crown and more at the jaw, so I cut the crown layers a little longer and leave weight at the perimeter. Wispy bangs cover the forehead without adding width at the temples. Medium density suits it, on women in their 20s and 30s. Scrunch in a curl cream and diffuse with the head tipped forward. Trim every six weeks.

31. Textured Shag for a Long Face

Long faces look balanced when a textured shag has width at the sides and a fringe that cuts the forehead. I leave the side layers fuller, keep the crown lower, and cut bangs at the brow. Medium to thick density suits it, on women in their 20s through 50s. Blow-dry the sides out with a round brush. Trim every six weeks.

32. Textured Shag for an Oval Face

Oval faces carry any version of a textured shag haircut, so I pick the shape by hair type: medium length for thick hair, jaw length for fine hair, and a razored crown for waves. Any density suits it, at any age, and the cut adjusts to straight, wavy or curly texture. Rough-dry with a texture spray or diffuse for waves. Trim every six weeks.

33. Grown-Out Textured Shag

A textured shag grows out well because the layers soften instead of dropping into a shelf. At three months I trim only the crown and bangs, so the back keeps gaining length toward a longer shag. Medium density suits it on oval and heart faces. Scrunch in a curl cream and air-dry. Shape every eight to ten weeks while growing.

34. Low-Maintenance Textured Shag

Of every textured shag haircut I cut, the medium one with point-cut crown layers at four inches, a collarbone perimeter and no bangs goes longest between visits. The layers blend as they grow instead of separating into a shelf. Medium density suits it on any face shape, at any age. Air-dry with a texture cream and scrunch the ends once nearly dry. Trim every ten weeks.

Worth a look next: butterfly bangs and shoulder length hair with bangs.

A textured shag haircut softens with long layers and curtain bangs, because that pairing keeps the shag from reading too harsh. I shear the ends so the wave comes through instead of a solid edge.

Scroll to Top