Straight hair hides nothing, so a visible layer line or an uneven perimeter shows the minute you flat iron it on a work morning. That is why most of these haircuts for long straight hair are cut dry, with slide cut layers or a blunt edge that stays clean for eight to ten weeks.
1. Blunt One Length Cut at the Mid Back

The blunt one length cut is the first of the haircuts for long hair straight clients ask about because the line shows every detail. I cut it on dry hair, straight across at the mid back, with no layers and no point cutting. It suits oval and heart shaped faces and medium to thick density. Blow-dry with a paddle brush and a smoothing cream, then flat iron the ends. Trim every ten weeks to keep the line sharp.
2. Long Straight Hair With Face Framing From the Chin

Face framing from the chin on long straight hair gives movement to a one length cut without layering the back. I slide cut the frame on dry hair from the chin to the collarbone and keep the perimeter blunt. It suits round and square faces because the frame creates a diagonal. Medium density is ideal. Blow-dry the front pieces away from the face with a round brush. Trim every ten weeks.
3. Long Layers With Invisible Steps

Straight hair shows every layer line, so long layers must be slide cut to stay invisible. I cut the shortest layer at the collarbone on dry hair and slide cut downward so no step shows. It suits any face shape and medium to thick density. Blow-dry with a large round brush and bend the ends under with a flat iron. Trim every ten weeks before the layer lines appear.
4. Long Straight Cut With Curtain Bangs
Credit: Instagram
Curtain bangs on long straight hair need to be cut dry and slightly longer than planned, because straight hair does not spring up. I cut them at the cheekbone, parted center, and connect them to long face framing. It suits oval, long and heart shaped faces with medium density. Blow-dry the bangs with a small round brush rolling away from the center. Trim the bangs every five weeks.
5. Blunt Cut With Full Fringe for Thick Hair

A blunt cut with a full fringe is the cleanest look for thick straight hair. I cut the fringe straight at the brow from a deep section and the length blunt at the chest, both on dry hair. Oval and long faces carry the heavy fringe. Thick density keeps the fringe full. Blow-dry the fringe flat with a paddle brush and the length smooth. Trim the fringe every four weeks and the length every ten.
6. Long Straight Hair With V Shaped Back

A V shaped back on long straight hair draws the eye down. I cut the perimeter on dry hair in a V from the shoulders to a point at the mid back and add long layers that follow the angle. It suits oval and round faces and medium to thick density. Blow-dry with a paddle brush and flat iron the ends. Trim every ten weeks to keep the point clean.
7. U Shaped Cut for Long Straight Hair

The U shaped cut rounds the perimeter so the ends curve toward the center. I cut it on dry hair in a soft U at the mid back and keep the layers out so the shape reads clearly. It suits heart shaped and oval faces and fine to medium density. Blow-dry with a round brush, rolling the ends in, and finish with a smoothing serum. Trim every ten weeks.
8. Long Straight Hair With Wispy Bangs

Wispy bangs on long straight hair stay sheer because straight hair lies flat. I cut a shallow triangle, point cut heavily to the brow on dry hair, and keep the length one length at the chest. Heart shaped and oval faces suit it, with fine to medium density. Blow-dry the bangs flat with a paddle brush, air-dry the rest. Trim the fringe every four weeks.
9. Long Layered Cut for Fine Straight Hair
Credit: Instagram
Fine straight hair needs layers kept long and few. I cut two layers only, at the collarbone and the chest, slide cutting so nothing shows, and keep the perimeter blunt. It suits oval and long faces and low density. Blow-dry upside down with a volumizing mousse, then smooth with a paddle brush and bend the ends. Trim every eight weeks to keep the ends full.
10. Thick Straight Hair With Internal Layers

Thick straight hair needs weight removed from inside so it lies flat. I cut long internal layers on dry hair and point cut the interior to take out bulk, keeping the perimeter blunt at the chest. It suits any face shape and thick density. Blow-dry with a paddle brush and a smoothing cream, then flat iron. Trim every eight weeks and thin the interior every other visit.
11. Long Straight Hair With a Center Part
Credit: Instagram
A center part on long straight hair needs symmetrical face framing. I cut the frame on dry hair from the lip to the chest, matched on both sides, and keep the back blunt. Oval and long faces suit the part. Medium density is ideal. Blow-dry with a paddle brush, part with a tail comb, and flat iron the front pieces close to the face. Trim every ten weeks.
12. Long Straight Cut With Deep Side Part
Credit: Instagram
A deep side part on long straight hair gives root lift without layers. I cut the perimeter blunt at the chest on dry hair and leave the face frame slightly longer on the heavy side. It suits round and square faces because the asymmetry breaks up width. Blow-dry the part on the chosen side with a root lifting spray, then flat iron. Trim every ten weeks.
13. Long Straight Hair With Side Swept Bangs

Side swept bangs on long straight hair cut a diagonal across the forehead. I cut them from the brow to the cheekbone on dry hair and blend them into long face framing. Round and square faces look softer with the angle. Medium density suits it. Blow-dry the bangs to the side with a flat brush and the length smooth. Trim the fringe every six weeks.
14. Feathered Layers for Long Straight Hair

Feathered layers on long straight hair are cut with the shears angled outward so each layer flicks away from the face. I start at the cheekbone on dry hair and feather to the chest. It suits oval and long faces and medium to thick density. Blow-dry with a round brush, rolling each layer back and out, and set with a light spray. Trim every eight weeks.
15. Long Straight Hair With Micro Bangs

Micro bangs on long straight hair give the strongest line. I cut them very short, well above the brow, blunt, on dry hair, and keep the length one length at the chest. Oval and long faces with medium density suit the contrast. Blow-dry the bangs flat with a paddle brush and flat iron the length. The fringe needs trimming every three weeks.
16. Long Straight Cut With Money Piece

A money piece on long straight hair brightens the face frame in a single stripe. I cut long face framing from the chin on dry hair, then lighten the front two sections two to three shades, keeping the lightener off the ends. It suits any face shape and medium density. Blow-dry smooth and flat iron the front pieces. Trim every ten weeks, refresh the color every twelve to sixteen.
17. Long Straight Hair for Women Over 50

Women over 50 with long straight hair do well with long layers from the collarbone and a face frame from the jaw. I slide cut the layers on dry hair and point cut the perimeter so the ends look soft. It suits oval and round faces and fine to medium density. Blow-dry with a round brush, rolling the ends under, and finish with serum. Trim every eight weeks and gloss every eight.
18. Long Straight Hair With Choppy Ends

Choppy ends on long straight hair make the perimeter look textured instead of flat. I point cut deep into the last two inches on dry hair and leave the rest one length. It suits oval, square and heart shaped faces and medium to thick density. Blow-dry with a paddle brush and finish with a dry texture spray at the ends. Trim every ten weeks because the cut forgives.
19. Long Straight Cut With Flipped Ends

Flipped ends on long straight hair come from outward graduation at the perimeter. I cut the back a touch shorter than the front on dry hair and point cut the ends so they kick out. It suits fine to medium density and oval or long faces. Blow-dry with a medium round brush, rolling the ends outward, and set with a light spray. Trim every ten weeks.
20. Long Straight Hair With Balayage

Balayage on long straight hair shows as clean vertical ribbons. I cut long layers first so the paint follows the fall, then hand paint the surface and leave the underneath dark. It suits any face shape and medium to thick density. Blow-dry smooth and flat iron so the ribbons read. Trim every ten weeks and refresh the balayage every sixteen.
21. Long Straight Hair With Hidden Undercut

A hidden undercut at the nape takes bulk out of thick straight hair. I clipper a small section under the occipital bone and cut the length blunt at the chest over it. The hair lies flatter and dries faster. It suits thick density and any face shape. Blow-dry with a paddle brush and a smoothing cream. Buzz the undercut every four weeks, trim the length every ten.
22. Long Straight Cut With Bottleneck Bangs

Bottleneck bangs on long straight hair are short in the center and widen to the cheekbone. I cut them on dry hair, narrow at the top, and blend the sides into long face framing. Oval and long faces suit the shape. Medium density is ideal. Blow-dry the bangs with a small round brush and flat iron the length. Trim the bangs every five weeks.
23. Long Straight Hair With Soft Graduation at the Back

Soft graduation at the back makes long straight hair sit closer to the body. I cut the back a half inch shorter than the sides on dry hair and point cut the line so it blends. The front stays blunt. It suits thick hair and oval or round faces. Blow-dry with a paddle brush and press the back flat. Trim every ten weeks.
24. Long Straight Hair With Chin Length Face Frame

A chin length face frame on long straight hair gives a bob effect in front without losing length. I cut the frame on dry hair starting at the chin and angling into long layers at the collarbone. It suits oval and heart shaped faces and medium density. Blow-dry the front pieces away from the face with a round brush and flat iron the length. Trim every eight weeks.
25. Long Straight Hair With Disconnected Layers

Disconnected layers on long straight hair mean the top tier is cut noticeably shorter and not blended. I cut the top at the chin and the bottom at the chest on dry hair so the two tiers hang separately. It suits thick hair and oval or long faces. Blow-dry with a paddle brush and flat iron each tier. Trim every eight weeks to keep the step visible.
26. Low Maintenance Long Straight Cut

The low maintenance long straight cut is blunt at the chest with two slide cut interior layers and nothing else. I cut it on dry hair so it air-dries into shape. It suits medium density and most face shapes. Apply a smoothing cream to wet hair, air-dry, and pass a flat iron over the ends if needed. One trim every twelve weeks keeps the line clean.
27. Long Straight Hair With Gray Blending

Gray blending on long straight hair needs the cut to break up the lines. I cut long layers from the collarbone with a chin length face frame, then add fine lowlights and highlights so gray and base mix. It suits women letting gray grow in, any face shape. Blow-dry with a round brush and a smoothing cream. Trim every eight weeks, gloss every six.
28. Long Straight Hair With Piecey Face Layers

Piecey layers around the face on long straight hair sit at the cheekbone and lip. I slide cut each piece to a point on dry hair so it separates rather than clumps. It suits oval and heart shaped faces with medium density. Blow-dry smooth and twist the short pieces forward with a little wax. Trim the face pieces every six weeks.
29. Long Straight Hair With Rounded Layers for Heart Faces

Heart shaped faces balance with long straight hair layered in a soft curve at the jaw. I cut the layers on dry hair from the cheekbone to the chest in a rounded line, adding width where the face narrows and keeping the perimeter blunt. Medium density suits it best. Blow-dry with a round brush, rolling the jaw layers inward. Trim every eight weeks.
30. Long Straight Hair With Layers for Round Faces

Round faces look longer with long straight hair layered below the chin only. I cut the shortest layer at the collarbone and the face frame at the jaw on dry hair, slide cutting so nothing sits at the cheek. Volume stays at the ends. Medium density suits it. Blow-dry upside down for root lift, then flat iron the sides close to the face. Trim every ten weeks.
31. Long Straight Hair With Tapered Face Frame

A tapered face frame on long straight hair melts from the cheekbone into the length with no steps. I slide cut it on dry hair, removing less as I go down. It suits round and square faces because the taper creates a diagonal. Medium density is ideal. Blow-dry the front back with a round brush and flat iron the rest. Trim every eight weeks.
32. Long Straight Hair With Blunt Bangs and Layers

Blunt bangs with long layers give long straight hair a strong fringe and soft length. I cut the fringe straight at the brow from a deep section and slide cut layers from the collarbone, both on dry hair. Oval and long faces suit it, with medium to thick density. Blow-dry the fringe flat and the length with a round brush. Trim the fringe every four weeks.
33. Long Straight Cut With Copper Color

Copper on long straight hair shows as one clean sheet of color. I cut the perimeter blunt at the chest with long face framing, then apply a single process copper and a gloss. It suits warm and neutral skin tones and any face shape. Blow-dry with a paddle brush and flat iron with a heat protectant. Trim every ten weeks and gloss every six.
34. Long Straight Hair With Short Crown Layers

Short crown layers on long straight hair add lift without touching the length. I cut the crown layers at the occipital bone on dry hair, point cut lightly, and keep the rest one length. It suits round and long faces and fine to medium density. Blow-dry the crown up with a round brush and flat iron the rest. Trim every eight weeks.
35. Long Straight Hair With Soft Fringe for Square Faces

Square faces soften under long straight hair with a soft fringe and rounded face framing. I point cut the fringe to the brow and curve the frame around the jaw on dry hair so no hard line meets it. Medium density suits it. Blow-dry the fringe with a small round brush and the length smooth. Trim the fringe every five weeks, the length every ten.
36. Waist Length Straight Hair With Blunt Ends

Waist length straight hair holds only if the ends stay blunt. I cut it straight across on dry hair with no layers and dust the ends every visit. It suits oval and long faces and thick density; fine hair thins out at this length. Blow-dry with a paddle brush and a heat protectant, then flat iron in large sections. Trim every eight weeks to prevent splitting.
37. Long Straight Hair With Collarbone Layers

Layers starting at the collarbone keep long straight hair moving without a short crown. I cut on dry hair with the shortest layer at the collarbone and slide cut everything below. It suits fine to medium density and women who want softness without obvious layers, which makes it one of the easier haircuts for long hair straight clients can maintain. Blow-dry with a large round brush and bend the ends. Trim every ten weeks.
38. Long Straight Hair With Highlights for Dimension

Fine highlights on long straight hair read as vertical ribbons. I cut long layers first on dry hair, then place highlights on the outer surface of each layer so it catches light when the hair moves. It suits any face shape and density. Blow-dry smooth and flat iron so the ribbons show. Trim every ten weeks and refresh the highlights every twelve to fourteen weeks.
39. Long Straight Hair With Long Bangs Parted in the Middle

Long bangs parted in the middle on straight hair should reach the chin so they tuck. I cut them dry, angling from the nose down, and connect them to long face framing. Round and square faces benefit from the vertical lines. Medium density suits it. Blow-dry the bangs forward with a round brush, split them, and flat iron the length. Trim the bangs every six weeks.
40. Long Straight Hair With Razor Softened Ends

Razor softened ends on long straight hair take the hard edge off a blunt cut. I cut the shape with shears, then razor only the last inch on dry hair so the ends taper. It suits medium to thick density; fine hair should skip the razor. Blow-dry with a paddle brush and finish with a smoothing serum. Trim every eight weeks before the razored ends fray.
41. Sleek Long Straight Hair With Glass Finish
Credit: Instagram
The glass finish on long straight hair starts with the cut: blunt at the chest, no layers, no point cutting. I blow-dry with a paddle brush and a smoothing cream, flat iron in half inch sections, and finish with a shine serum. It suits oval and long faces and medium to thick density. Trim every eight weeks because split ends break the shine.
42. Long Straight Hair With Layers and Air Dried Finish

The air dried version of long straight hair is cut dry with long layers from the collarbone and a soft perimeter. It suits medium density and most face shapes. Apply a smoothing cream to wet hair, comb through with a wide tooth comb, and air-dry without touching it until fully dry. Pass a flat iron over the ends only if needed. Trim every ten weeks.
Straight hair hides nothing, so a visible layer line or an uneven perimeter shows the minute you flat iron it on a work morning. For haircuts long straight hair clients want, I keep the length one-length or cut the layers so they disappear into the ends. A flat paddle brush and a heat protectant are the only tools most of these need. oval face haircuts stay the shape I reach for most, and the same length rules apply whether the hair is straight, wavy, layered, or curly.
