Front pieces that start at the cheekbone and drop to the collarbone keep long hair from hanging flat by the afternoon, and they fall back into place on second-day hair. Long layered haircuts with face framing work best on medium to thick hair, though fine hair can wear them with fewer layers. Plan on a trim every 8 weeks.
1. Long Layers With Cheekbone Face Framing

Long layers with cheekbone face framing start the front pieces at the cheekbone and drop them in half-inch steps to the collarbone, with long layers through the back. I point cut every section so nothing looks blunt. It suits medium to thick hair and oval, round or square faces. Blow-dry with a round brush, pulling the front forward. Among long layered haircuts with face framing, this is the one I cut most. Trim every 8 weeks.
2. Long Layers With Chin-Length Face Framing

Long layers with chin-length face framing keep the front pieces at the chin and the rest of the layers long, starting at the collarbone. The chin-length pieces soften a square jaw. I point cut the front and slide cut the layers behind. It suits medium to thick hair and square, round or heart faces. Blow-dry the front pieces away from the face. Trim every 8 weeks.
3. Long Layers With Collarbone Face Framing

Long layers with collarbone face framing start the front pieces at the collarbone so the face stays open, with layers from there down to the ends. It is the softest version. I point cut the layers and keep the perimeter full. It suits fine to medium hair and oval or long faces. Blow-dry with a round brush and bend the front pieces back. Trim every 10 weeks.
4. Face-Framing Layers With Curtain Bangs

Face-framing layers with curtain bangs start with bangs that split at the center and sweep to the cheekbones, then step the front pieces down to the collarbone and keep the layers long behind. I razor the bangs and point cut the layers. It suits medium to thick hair and oval, round or square faces. Blow-dry the bangs over a round brush. Trim the bangs every 5 weeks.
5. Butterfly Cut With Face Framing

A butterfly cut with face framing keeps short layers from the chin to the shoulder and long layers underneath, with the front pieces cut to the cheekbone. I pull the hair straight up and point cut. It suits thick hair and oval or long faces. Blow out with a large round brush and set with Velcro rollers for 10 minutes. Trim every 8 weeks.
6. Long Layers With Face Framing for Fine Hair

Long layers with face framing for fine hair take only two long layers and face-framing pieces that start at the chin, so the ends stay full. I point cut with scissors, never a razor. It suits fine hair and oval, round or heart faces. Blow-dry with a volumizing mousse and a round brush, lifting at the roots. Trim every 8 weeks so the ends do not look thin.
7. Long Layers With Face Framing for Thick Hair

Long layers with face framing for thick hair remove bulk from the inside with internal layers and keep the outer layers long, with front pieces stepped from the cheekbone. I razor the interior and point cut the outside. It suits thick, coarse hair and oval, round or square faces. Blow-dry with a round brush and a smoothing cream. Trim every 8 weeks and have the inside thinned each visit.
8. Face-Framing Layers on Straight Hair

Face-framing layers on straight hair need clean lines. I cut the front pieces with scissors so the steps show, starting at the cheekbone and dropping to the collarbone, with long layers behind. It suits straight, medium density hair and oval, heart or long faces. Blow-dry the front with a round brush and finish the length with a flat iron. Trim every 8 weeks.
9. Face-Framing Layers on Wavy Hair
Credit: Instagram
Face-framing layers on wavy hair are cut on damp hair with point cutting so the front pieces fall in soft waves from the cheekbone to the collarbone. The layers behind stay long. It suits 2A to 2C hair of medium density and oval, heart or square faces. Air-dry with a light mousse and twist the front pieces away from the face. Trim every 8 weeks.
10. Face-Framing Layers on Curly Hair

Face-framing layers on curly hair are cut dry, curl by curl, so the front pieces sit at the cheekbone once they spring up. I cut them to the chin dry and round the layers behind. It suits 3A to 3C curls of medium density and oval or long faces. Diffuse with a curl cream and clip the front curls forward. Trim every 10 weeks.
11. Face-Framing Layers for Round Faces

Face-framing layers for round faces start the front pieces at the chin or below, never at the cheekbone, so nothing adds width at the widest part of the face. The layers behind start at the collarbone. I point cut everything. It suits medium to thick hair. Blow-dry the front pieces away from the face and keep the crown lifted. Trim every 8 weeks.
12. Face-Framing Layers for Square Faces

Face-framing layers for square faces land the shortest piece on the corner of the jaw so the angle is covered, then step down to the collarbone. The layers behind start at the collarbone. I point cut the front. It suits medium to thick hair of any texture. Blow-dry the front pieces toward the face with a round brush. Trim every 8 weeks.
13. Face-Framing Layers for Oval Faces
Credit: Instagram
Face-framing layers for oval faces can start anywhere from the cheekbone to the collarbone, so I cut to the hair texture. Straight hair gets clean steps and wavy hair gets soft point cutting. The layers behind stay long. It suits any density. Blow-dry with a round brush or air-dry with a mousse and twist the front pieces back. Trim every 8 weeks and gloss between visits.
14. Face-Framing Layers for Heart Faces

Face-framing layers for heart faces start the front pieces at the chin so the width sits low and balances a narrow chin. I add a soft curtain fringe to cover the forehead. The layers behind start at the collarbone. It suits fine to medium hair and straight or wavy texture. Blow-dry with a round brush and flip the front pieces out at the chin. Trim every 8 weeks.
15. Face-Framing Layers for Long Faces

Face-framing layers for long faces start the front pieces at the cheekbone and add a full curtain fringe, so the face reads shorter. The layers behind start at the collarbone and are blown out for width. It suits medium to thick hair. Blow-dry with a round brush and a volumizing mousse, bending the front pieces outward. Trim every 8 weeks.
16. Long Layers With Face Framing for Women Over 40

Long layers with face framing for women over 40 keep the front pieces at the cheekbone so they lift the face, with the layers behind starting at the collarbone. I point cut for softness. It suits fine to medium hair and oval, round or square faces. Blow-dry with a round brush and a volumizing mousse. Trim every 8 weeks and cover the roots every 4 to 5 weeks.
17. Long Layers With Face Framing for Women Over 50

Long layers with face framing for women over 50 keep the length just below the shoulder, start the front pieces at the cheekbone and keep only three long layers so the ends stay full. I point cut. It suits medium to thick hair and oval or long faces. Blow-dry the front with a round brush and air-dry the rest. Trim every 8 weeks and gloss every 8 weeks.
18. Blonde Long Layers With Face Framing
Credit: Instagram
Blonde long layers with face framing are cut after the color so I can see where the light pieces fall. The front pieces step from the cheekbone to the collarbone and the layers behind stay long. I point cut, since blonde ends are fragile. It suits fine to medium hair and oval or heart faces. Blow-dry with a heat protectant. Trim every 8 weeks and tone every 6 weeks.
19. Brunette Long Layers With Face Framing
Credit: Instagram
Brunette long layers with face framing show the cut best when the layers stay long and the front pieces take clean steps, since dark hair hides soft layering. I start the front at the cheekbone and the layers at the collarbone. It suits medium to thick hair and oval, square or long faces. Blow-dry with a round brush and add a shine spray. Trim every 8 weeks.
20. Copper Long Layers With Face Framing

Copper long layers with face framing pair a warm copper with front pieces stepped from the cheekbone and long layers behind. The color makes every step visible, so I keep them even. It suits fair to medium skin and medium density hair. Blow-dry with a round brush and a shine serum. Trim every 8 weeks. Copper fades fast, so gloss every 4 weeks and touch up the roots every 5.
21. Face-Framing Layers With Money Pieces

Face-framing layers with money pieces put a bright piece on each side of the face. I foil the front inch on each side, tone, then cut the front pieces from the cheekbone to the collarbone so the color follows the steps. It suits medium to thick hair and most face shapes. Blow-dry the front pieces apart with a round brush. Tone every 6 weeks. Trim every 8 weeks.
22. Face-Framing Layers With Balayage
Credit: Instagram
Face-framing layers with balayage paint the lightest color on the front pieces and the ends so the steps show. I cut the layers first, then the colorist paints each one. The front starts at the cheekbone. It suits medium to thick hair and most face shapes. Blow-dry with a round brush. Trim every 8 weeks and gloss every 8 weeks.
23. Face-Framing Layers With Highlights

Face-framing layers with highlights use hand-painted pieces through the long layers to show the cut, with a lighter piece on each side of the face. The front starts at the cheekbone. It suits medium to thick hair and most face shapes. Blow-dry with a round brush. Trim every 8 weeks. The highlights need a gloss every 8 weeks and a touch-up every 4 months.
24. Long Layers With Wispy Face Framing

Long layers with wispy face framing razor the front pieces thin so they almost disappear at the ends, from the cheekbone to the collarbone. The layers behind stay long and full. It suits fine to medium hair and round or square faces, since the wisps add no weight. Blow-dry the front with a small round brush. Trim every 8 weeks.
25. Long Layers With Thick Face Framing

Long layers with thick face framing take a deep section on each side, two inches back from the hairline, and cut heavy front pieces to the chin. The layers behind start at the collarbone. It suits thick, straight hair and long or oval faces. Blow-dry the front pieces forward, then bend them back with a round brush. Trim every 8 weeks.
26. Face-Framing Layers With a Middle Part

Face-framing layers with a middle part keep the front pieces equal on both sides and mirror the steps from the cheekbone down. I check both sides against the nose while cutting. The layers behind stay long. It suits oval, long and heart faces and medium to thick hair. Blow-dry the front pieces away from the face with a round brush. Trim every 8 weeks.
27. Face-Framing Layers With a Side Part

Face-framing layers with a side part have one longer front piece and one shorter. I cut with the part in place so the short side starts at the cheekbone and the long side at the chin. The layers behind stay long. It suits round, square and heart faces and medium density hair. Blow-dry the heavy side across with a round brush. Trim every 8 weeks.
28. Face-Framing Layers With Flipped Ends

Face-framing layers with flipped ends angle every front piece outward so it kicks away from the face, from the cheekbone to the collarbone. The layers behind flip the same way. It suits medium to thick hair and oval, round or heart faces. Blow-dry each piece with a round brush, rolling the ends out, and finish with a light spray. Trim every 8 weeks.
29. Face-Framing Layers With a Blowout

Face-framing layers with a blowout are cut at a 45-degree angle so the front pieces bend back and the long layers bend under. I point cut each section. It suits medium to thick hair and oval or long faces. Blow-dry each section with a large round brush and set with Velcro rollers for 10 minutes. The blowout lasts three days. Trim every 8 weeks.
30. Face-Framing Layers With Beach Waves

Face-framing layers with beach waves are point cut so the front pieces feel light from the cheekbone down, then waved with a one-inch iron with the ends left out. It suits medium to thick hair and oval, square or heart faces. Wave the front pieces away from the face and finish with a sea salt spray. Trim every 8 weeks.
31. Sleek Long Layers With Face Framing

Sleek long layers with face framing are blown out flat so the steps in the front pieces show as clean lines. I cut the front with scissors from the cheekbone to the collarbone and keep the layers long. It suits straight, medium density hair and oval or long faces. Blow-dry with a flat brush and a smoothing serum, then pass a flat iron over the ends. Trim every 8 weeks.
32. Face-Framing Layers With Internal Layers

Face-framing layers with internal layers keep the outside long and blunt, with the layers hidden inside the hair and only the front pieces visible from the cheekbone down. I razor the interior to remove bulk. It suits thick, straight hair and oval, square or round faces. Blow-dry with a flat brush and a smoothing cream, then pull the front pieces forward. Trim every 8 weeks and have the inside thinned each visit.
33. Face-Framing Layers on Natural Hair

Face-framing layers on natural hair are cut dry on stretched hair so shrinkage does not surprise anyone. I cut the front pieces to the chin stretched, knowing they will sit at the cheekbone, and round the layers behind. It suits 3C to 4B hair and oval or long faces. Diffuse with a curl cream and pull the front pieces forward while drying. Trim every 12 weeks and deep condition every two weeks.
34. Face-Framing Layers With a Low Ponytail

Face-framing layers with a low ponytail show why the cut works pulled back. The front pieces from the cheekbone to the collarbone fall out around the face while the long layers go into the ponytail. I cut the front so it clears the eyes when the hair is up. It suits medium to thick hair and most face shapes. Trim every 8 weeks.
35. Face-Framing Layers With a Half-Up Clip

Face-framing layers with a half-up clip gather the top section in a claw clip and leave the front pieces down from the cheekbone to the collarbone. I cut the front so it falls at the jaw when the top is clipped. It suits medium to thick hair and oval, round or heart faces. Blow-dry the front with a round brush. Trim every 8 weeks.
36. Face-Framing Layers on Waist-Length Hair

Face-framing layers on waist-length hair start the front pieces at the chin and use only three long layers from there down, so the ends stay thick. I point cut. It suits thick hair and oval or long faces. Blow-dry the front with a round brush and air-dry the length. Long layered haircuts with face framing at this length need a trim every 10 weeks.
37. Face-Framing Layers on Mid-Back Hair

Face-framing layers on mid-back hair keep the length at the mid-back and step the front pieces from the cheekbone to the collarbone, with long layers starting at the collarbone. I point cut every section. It suits medium to thick hair and oval, round or square faces. Blow-dry with a round brush and a light cream. Trim every 8 to 10 weeks.
38. Shaggy Long Layers With Face Framing

Shaggy long layers with face framing razor the front pieces from the cheekbone down so they feather, and keep the layers behind long and wispy. It suits medium to thick hair with wave and oval or long faces. Air-dry with a texture spray and scrunch, or diffuse. The feathered front hides a grown-out trim, so the cut forgives a missed appointment. Trim every 10 weeks.
39. Soft Long Layers With Face Framing

Soft long layers with face framing are cut with slide cutting so there are no visible steps. The front pieces blend from the cheekbone into the long layers and the layers into the length. It suits medium density hair and any face shape. Blow-dry with a round brush and a light cream. This version grows out well. Trim every 10 weeks.
40. Choppy Long Layers With Face Framing

Choppy long layers with face framing are point cut deep, about an inch into each section, so the front pieces and the ends look broken up. The front starts at the cheekbone. It suits medium to thick hair and oval, square or long faces. Air-dry with a texture paste and twist pieces at the ends, or blow-dry rough with your fingers. Trim every 8 weeks.
41. Face-Framing Layers With Side-Swept Bangs

Face-framing layers with side-swept bangs sweep a long fringe across the forehead and blend it into front pieces that step down to the collarbone. I point cut the fringe so it blends into the side. It suits fine to medium hair and oval, long or heart faces. Blow-dry the fringe across with a round brush. Trim the bangs every 4 weeks and the length every 8.
42. Face-Framing Layers With Bottleneck Bangs

Face-framing layers with bottleneck bangs pair bangs that are narrow at the top and flare out at the cheekbones with front pieces that continue the flare down to the collarbone. The layers behind stay long. It suits medium to thick hair and long or oval faces. Blow-dry the bangs with a small round brush. Trim the bangs every 5 weeks.
43. Grown-Out Face-Framing Layers

Grown-out face-framing layers let the front pieces reach the collarbone and blend them into the long layers so there is no gap. I cut the layers to meet the front. It suits anyone who wants fewer trims and most face shapes. Blow-dry the front over a round brush and sweep it back, or tuck it behind the ears. Trim every 10 to 12 weeks.
44. Face-Framing Layers With Gray Blending

Face-framing layers with gray blending keep the length past the shoulder with front pieces from the cheekbone and long layers behind, and the colorist weaves fine highlights and lowlights so the gray grows in without a line. I cut after the color. It suits medium to thick hair. Blow-dry with a round brush. Trim every 8 weeks and refresh the blending every 12.
45. Low-Maintenance Long Layers With Face Framing

Low-maintenance long layers with face framing start the front pieces at the collarbone and keep the layers long, cut with a razor so the grow-out looks intentional. It still looks right at 12 weeks. It suits medium to thick hair and most face shapes. Air-dry with a light cream and sweep the front pieces back. Trim every 12 weeks and gloss between visits.
Front pieces that start at the cheekbone and drop to the collarbone are what keep long hair from hanging flat by the afternoon. For long layered haircuts with face framing, I cut those pieces dry so they land where the face actually curves. A quick bend with a round brush at the roots is all it takes to reset them. oval face haircuts stay the shape I get asked about most, and the same length rules apply whether the hair is curly, layered, fine, or graying.
