Straight hair hides nothing, so every layer in a shag shows exactly where it was cut, from the crown down to the ends. A straight shag haircut works best with clean shears, point-cut edges, and a round brush to set the flip, and most versions need a trim every six to eight weeks.
1. Collarbone Straight Shag With Curtain Bangs

A straight shag haircut shows every layer, so the crown layers have to be cut cleanly: shears for the shape, razor only on the last inch. I set the perimeter at the collarbone, cut the crown to four inches, and slide cut curtain bangs to the cheekbone. Medium to thick density suits it on oval and long faces. Blow-dry the crown with a round brush and leave the length straight. Trim every seven weeks.
2. Long Shag on Straight Hair
A long shag haircut on straight hair keeps the shortest crown layers at five inches and the perimeter past the collarbone, so the layers read as steps down the length. I cut the layers with shears at a 90-degree elevation and point cut the ends. Medium to thick density suits it on oval and square faces. Blow-dry straight and flat iron the ends outward. Trim every eight weeks.
3. Jaw-Length Straight Shag
At the jaw, a straight shag reads as a choppy bob with a shorter crown, and the straight texture shows each point-cut layer. I cut the crown to three inches and the perimeter at the jaw. Medium density suits it on oval and long faces. Work a matte paste through dry hair and push the layers apart with fingers. Trim every six weeks.
4. Shoulder-Length Straight Shag
At the shoulder, a straight shag flips at the ends where the hair hits the collarbone, and I cut the perimeter to use that flip instead of fighting it. Layers start at the chin and are point cut. Medium density suits it on oval and heart faces, on women in their 20s through 40s. Blow-dry with a round brush and let the ends kick out. Trim every eight weeks.
5. Straight Shag With Wispy Bangs
Wispy bangs on straight hair sit flat and show skin through them, which keeps the front light while the crown layers do the work. I point cut the bangs at the brow from a shallow section. Fine to medium density suits it on oval and heart faces. Blow-dry the bangs flat with a paddle brush and the crown with a round brush. Trim the bangs every four weeks and the cut every seven.
6. Straight Shag With Blunt Bangs
Blunt bangs on a straight shag read graphic, because straight hair holds the line without any bend. I cut them dry at the brow from a shallow triangle and thin the underside so they lie flat. Medium density suits it on oval and long faces. Blow-dry the bangs flat and the ends outward. Trim the bangs every four weeks and the shag every seven.
7. Straight Shag With Bottleneck Bangs
Bottleneck bangs start narrow at the part and widen to the cheekbone, and on straight hair the shape stays exactly where I cut it. I cut the center at the brow and lengthen each side, then connect them to the crown layers. Medium density suits it on oval and heart faces, on women in their 20s through 40s. Blow-dry the bangs with a medium round brush. Trim every six weeks.
8. Straight Shag With Side-Swept Bangs
Side-swept bangs on straight hair fall in one clean piece across the brow, and I cut them long at the cheekbone and point cut the ends. The crown layers behind sit at four inches and are point cut so they blend into the bang. Medium density suits it on round and square faces, on women over 30. Blow-dry the bangs across with a round brush. Trim every six weeks.
9. 70s Straight Shag
The 70s shag on straight hair is center-parted with curtain bangs, heavy crown layers and ends flipped out with a round brush. I cut the layers with shears at a high elevation and keep the perimeter at the collarbone. Medium to thick density suits it on oval and long faces, on women in their 20s and 30s. Blow-dry the ends outward and set with hairspray. Trim every seven weeks.
10. Face-Framing Straight Shag
Face-framing layers from the cheekbone to the chin connect the bangs to the body of a straight shag, so the front does not step down in one hard line. I slide cut the front pieces dry and point cut the rest. Medium to thick density suits it on oval and square faces. Blow-dry the front back with a round brush and the rest straight. Trim every six weeks.
11. Straight Shag With Flipped Ends
Straight hair holds a flip all day once it is set, and flipped ends give a shag width at the shoulder. I cut the perimeter with a slight bevel out and the layers with shears. Medium density suits it on long and oval faces, on women in their 20s through 40s. Blow-dry the ends out with a medium round brush and set with a light spray. Trim every seven weeks.
12. Sleek Straight Shag
A sleek straight shag is flat-ironed so the layers show as clean steps, and I cut the layers with shears only, no razor, for a precise edge. The perimeter sits at the collarbone. Medium density suits it on oval and long faces, on women over 30. Blow-dry with a paddle brush, flat iron at 350 degrees, and finish with shine serum. Trim every six weeks.
13. Straight Shag With Internal Layers
Internal layers under the top section give a straight shag movement without visible steps, which suits clients who want texture but a smooth outline. I cut two or three short layers underneath, drop the top back over them, and point cut the surface lightly. Thick density suits it on oval and heart faces, on women over 30. Blow-dry with a round brush and finish with a drop of serum. Trim every eight weeks.
14. Point-Cut Straight Shag
Point cutting into straight hair breaks up each layer’s edge so it does not look like a ruler line. I point cut deep into the crown layers and shallow into the perimeter. Fine to medium density suits it on oval and long faces, on women over 30. Blow-dry with a round brush and scrunch in a light paste. Trim every six weeks.
15. Razor-Cut Straight Shag
The razor on straight hair leaves tapered, feathered ends, and I use it only on the last inch of each layer so the hair does not frizz. The crown sits at four inches and the perimeter at the collarbone. Medium to thick density suits it on oval and heart faces. Rough-dry with a texture spray and separate the layers with fingers. Trim every six weeks.
16. Straight Shag on Fine Hair
Fine straight hair carries a shag if the layers stay shallow and I point cut instead of razor, because a razor thins fine ends. Short crown layers give lift and the perimeter stays at the shoulder. Fine density suits it on oval and heart faces. Blow-dry the crown upside down with a volumizing mousse and finish with a dry texture spray. Trim every six weeks.
17. Straight Shag on Thick Hair
Thick straight hair shows the weight of every layer, so I razor the mid-lengths to remove bulk and point cut the crown for texture. The perimeter sits at the collarbone. Thick density suits it on oval and long faces. Rough-dry with sea salt spray and let the layers separate, or blow-dry smooth for a cleaner look. Trim every seven weeks.
18. Straight Shag on Asian Hair
Coarse, very straight hair holds a shag’s layers sharply, and I cut each layer with shears and thin the ends with point cutting so they do not look blunt. Curtain bangs soften the front. Thick density suits it on oval and heart faces. Blow-dry with a round brush and bend the ends with a flat iron. Trim every seven weeks.
19. Straight Shag With a Deep Side Part
A deep side part on a straight shag sends the heavy side across the brow in one piece and lifts the crown on the other. I cut the crown layers shorter on the light side so the part holds. Medium density suits it on round and oval faces. Blow-dry the roots against the part, then flip it back. Trim every six weeks.
20. Center-Part Straight Shag
A center part on a straight shag shows the shortest crown layers evenly on both sides. I cut both sides to match and keep the layers symmetrical. Medium density suits it on oval and long faces, on women in their 20s and 30s. Blow-dry straight down with a paddle brush and flip the ends out with a round brush. Trim every six weeks.
21. Straight Shag Mullet
A straight shag mullet keeps the crown at three inches, the sides above the ear, and the back past the nape, and the straight texture shows the drop between them clearly. I cut the sides and crown with shears and point cut the back. Medium density suits it on oval and square faces, on women in their 20s and 30s. Rough-dry with paste. Trim every five weeks.
22. Straight Shag With a Nape Undercut
Clippering the nape under a straight shag takes out bulk and lets the back layers sit flat against the neck. I clipper a two-inch band with a number two guard and cut the layers over it. Medium to thick density suits it on oval and heart faces, on women in their 20s and 30s. Blow-dry smooth. Re-clipper every four weeks.
23. Copper Straight Shag
Copper on straight hair reflects light along the whole length, so the layers of the shag show as bands of shine. I color with a copper permanent at a level seven, then cut the shag dry. Medium to thick density suits it on oval and heart faces, on warm skin tones. Wash in cool water and use a copper-depositing conditioner weekly. Gloss every six weeks.
24. Blonde Straight Shag
A level nine blonde on a straight shag shows every layer line, so I cut the shape clean before lightening. I lift with a bond builder, tone, then point cut the shag dry. Fine to medium density suits it on oval faces, on cool and neutral skin tones. Use a purple shampoo weekly. Tone every five weeks and retouch roots every eight.
25. Jet Black Straight Shag
Jet black on straight hair gives a shag a glossy, graphic look where the layers read as sharp steps. I apply a semi-permanent black, then cut the layers with shears. Medium to thick density suits it on oval and long faces, on fair and olive skin tones. Blow-dry smooth and finish with a shine spray. Refresh the color every five weeks.
26. Balayage Straight Shag
Balayage on a straight shag is painted onto the top of each layer, so the color sits where the steps show. I paint ribbons through the crown layers and ends and leave the root natural. Medium to thick density suits it on oval and long faces, on women over 30. Blow-dry with a round brush. Tone every eight weeks and repaint every four months.
27. Straight Shag for Women Over 40
Over 40, I keep the straight shag haircut softer: crown layers at four inches, point cutting instead of a razor, and a perimeter at the collarbone. The shape moves without looking undone. Medium density suits it on oval and heart faces. Blow-dry with a round brush and a light mousse, then bend the ends under or out. Trim every seven weeks.
28. Straight Shag for Women Over 50
For clients over 50 with straight hair, short crown layers add lift where hair thins first, and the longer back keeps the shag from reading too short. I point cut the crown and leave the perimeter at the shoulder. Fine to medium density suits it on oval and round faces. Blow-dry the crown up with a root lift spray. Gloss every eight weeks and trim every six.
29. Straight Shag for a Round Face
On a round face, the height of the crown layers and long curtain bangs angled across the forehead lengthen the face. I keep the side layers flat and the crown at three inches. Medium density suits it, on women over 30. Blow-dry the crown up and the bangs across with a round brush. Avoid width at the cheeks. Trim every six weeks.
30. Straight Shag for a Square Face
Square jaws soften when the straight shag’s perimeter sits below the jaw with point-cut ends instead of a blunt line. Curtain bangs at the cheekbone soften the forehead too. Medium to thick density suits it on square faces, on women in their 20s through 40s. Blow-dry with a round brush and bend the ends with a flat iron. Trim every six weeks.
31. Straight Shag for a Heart Face
Heart faces need less at the crown and more at the jaw, so I cut the crown layers a little longer and leave weight at the perimeter. Wispy bangs cover the forehead without adding width at the temples. Medium density suits it, on women in their 20s and 30s. Blow-dry the ends under with a round brush. Trim every six weeks.
32. Straight Shag for a Long Face
Long faces look balanced when a straight shag has width at the sides and a fringe that cuts the forehead. I leave the side layers fuller, keep the crown lower, and cut bangs at the brow. Medium to thick density suits it, on women in their 20s through 50s. Blow-dry the sides out with a round brush. Trim every six weeks.
33. Grown-Out Straight Shag
A straight shag grows out into a long shag haircut on straight hair without an awkward stage, because the layers lengthen in step. At three months I trim only the crown and bangs so the back keeps gaining length. Medium density suits it on oval and heart faces. Blow-dry with a round brush. Shape every eight to ten weeks while growing.
34. Low-Maintenance Straight Shag
Of every straight shag haircut I cut, the one with point-cut crown layers at four inches, a collarbone perimeter and no bangs goes longest between visits. The layers blend as they grow instead of separating into a shelf. Medium density suits it on any face shape, at any age. Air-dry with a light cream and bend the ends once dry. Trim every ten weeks.
Read next: long shag haircut with curtain bangs and graduated bob haircuts short.
<
A shag haircut straight hair needs the choppy layers cut shorter at the crown, because on sleek hair the shag only shows through the cut, not the wave. Point-cut ends keep it from looking chopped.

































